What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 01.07.2025 01:03

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

2024–10–14 [Omar Gharbi Omar Gharbi ]

The MOV will conduct when the voltage exceeds 50% of line voltage.

Have you ever had sex with sisters?

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

(Dc diagram shown, AC is similar).

Here is a simplified AC power diagram.

Veritatis voluptatem autem enim similique quo quasi magnam tempora.

The third is lightning and “how it gets conducted into a home.”

what exactly is a ‘surge’ protector?

These are simplified answers to the original question, and does not change anything I wrote above.

I Can't Wait for Apple's F1 Movie. Its Haptic iPhone Trailer Has Me Even More Excited - CNET

He then describes Rainy Season and Lightning.

In schematic diagrams this is the symbol for a fuse:

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Microsoft Confirms Password Deletion—Now Just 8 Weeks Away - Forbes

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

One is “what exactly is in a ‘surge protector’ ? ”

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Warner Bros. Discovery shareholders symbolically vote against giving David Zaslav more money - AV Club

It also is a device that limits the change in current flow.

Edit 2024–10.

What does a fuse do?

Why is Reagan seen as the best president in the USA when he literally destroyed the American economy with trickle down system and was strongly against worker unions?

2024–10–10[John johnson John Johnson ]

First Sentence:

the problem then depends on "how fast does the fuse operate?".

Kobo’s Libra Colour and Elipsa 2E e-readers have dropped to some of their best prices - The Verge

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

These devices are installed between the “hot” and “neutral” and protective ground.

What are some lesser-known facts about Bollywood and the Indian film industry? Are there any insider secrets that only those in the industry would know? How reliable are these claims?

This is where this question deviates from being a 'generic' question, and becomes more specific.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

This one hit behind the barn.

Why do men prefer low-maintanence women?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

In what ways is modern day Russia similar to the USSR? How does it differ from the USSR in terms of culture and politics?

A fuse is a non-resetable over current circuit protector.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Barnstars:

Nancy Wilson’s stolen custom-built Telecaster guitar was recovered by police in New Jersey - AP News

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

But it can get overloaded, and no longer works.

[image of Common-mode choke]

I Used to Dread Taking Creatine—Then I Found These Gummies - The Daily Beast

Upvotes:

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

At least they know the answer if they wanted it.

2025 NBA Finals: 4 things to watch for in Game 3 - NBA

This device then solves the entire problem.

a photo is worth a thousand words.

The other is “what does a “fuse” do?”

Parkinson's Disease Might Not Start in The Brain, Study Finds - sciencealert.com

It seems Mohan does not understand the difference between a comment and an Answer.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

This is the picture of an electronic coil of wire wound around a core of magnetic material.

If you could go back and rewrite the Legend of Korra, what would you change, and why?

I post the exact comment here.

so, what happens?

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

So, the voltage could go up to 500 volts, and the fuse will not open up.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

but this device (an Inductor) … impedes the rapid changes in the current.

An AC voltage/ current source, and an ac inductive load.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

nine

At one ohm, the resistor has a maximum of 1 watt power.

There are three different concepts here that are getting confused.

For this case there are devices called Metal oxide varistors (MOV).

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

One

But… the neutral is now “floating” because of the 1 ohm resistance.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

but I think this circuit , shows a few more pieces.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

What is lightning?

Now when you have a certain ac resistance, then a current flows in a loop.

He then describes the function of a fuse.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

The bolt then partially travels down the line to your home.

eight

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

He then asserts :

This is where the MOV conducts again, and dissipated the energy.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Because the load is inductive, the current lags the voltage.(by a bit).

2024–10–16 [ OO OLAOYE OYEBODE ]

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

A circuit breaker is similar, but is resettable.

There are two important concepts here.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

This is 'the assistant's answer'

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

[old diagram got deleted by accident]

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.